Making a Yarn Bowl

Next
DSC02023
















I started off with a 8x8x51/2 inch block of English walnut,  I mounted it on my 3” faceplate, turned it round. I like to get a nice curve so the bowl is as round as I can get it.

DSC02026
DSC02027
DSC02028

Then I cut a 3”x 3/16 deep recess for my step jaw set of my Super Nova chuck

DSC02029

Remount with the chuck and then drill a depth hole.

DSC02030

Then hollow it out. I was able to get the inside as round as a ball. Used a combination of bowl gouges. Did the last finishing cut with a 1/2” gouge ground with a 60° Ellsworth grind or Irish grind.  In order to cut the lip and the following 1 or 2 inches of depth,  I used a deep “U” shaped gouge with a fingernail grind starting at about 40°.

DSC02031

I got it sanded and made sure the bottom was not flat, it has to be rounded as well. Not easy to show how rounded the bottom is.

Then I cut the Yarn slot.

DSC02032

I start off with a 3/8” hole and you can use any shape you like. I like this one because it keeps the yarn pulling though the hole. In order to cut this I had to modify my Air driven hacksaw.  As you can see, I leave the bowl on the lathe with the index pin in place to hold the bowl, this makes it easy to cut.

DSC02035
DSC02033


DSC02034

I start out by mounting a Dremel saw blade and cutting a nice smooth line, then I change to a 3/32 carbide blade that is used normally for cutting ceramic tile. This blade will follow the saw cut and gives a cut that is just right for most yarns. Then sand this up with a strip of cloth backed 120 grit followed with 220 grit and a few coats of Tung oil  and you are done.

DSC01877DSC01903

You get a beautiful bowl like these ready for your favorite Knitter.

© Rocky Roost Wood Turning. -- All rights reserved. All information presented on this site is copyrighted by Rocky Roost Wood Turning except where otherwise noted. No portion of this site may be copied without express written consent. Other sites are invited to link to any aspect of this site provided that all content is presented in its original form and is not placed within another frame.